2
quickstart guide
DM-MD64X64
www.crestron.com
888.273.7876
201.767.3400
Specifications subject to
change without notice.
For details, refer to the latest version of the
DM-MD64X64
DigitalMedia Switcher Operations & Installation Guide, Doc. 7318.
QUICKSTART DOC. 7319A (2035907) 02.13
64X64 DigitalMedia
™
Switcher
DM-MD64X64
Configuring Network Settings
1
6
Configure network settings on the “Ethernet Setup” screen of the
DM switcher user interface:
1. Set
DHCP
to
ON
or
OFF
. The default setting is
ON
.
2.
(Optional)
Enter a hostname.
3.
(Optional)
Enter a domain name.
4.
(Applicable only if DHCP is set to
OFF
)
Enter a static IP address,
subnet mask, and default router address.
5. Set the system ID. The default setting is
1
.
6. Set control system connection settings:
a. Enter the IP address or hostname of the control system
connected to the DM switcher.
b. Enter the IP ID of the DM switcher.
1
Configuring DigitalMedia Endpoints
1
7
Advanced configuration tasks of DigitalMedia endpoints (DM-TX
transmitters and DM-RMC receivers) include detailed scaler
configuration and configuration of video parameters (for example,
brightness and contrast). To be able to perform such tasks, refer to the
latest version of the DM-MD64X64: Configuring DigitalMedia
Endpoints Quickstart Guide (Doc. 7489). It is available from the
Crestron Web site at www.crestron.com/manuals.
NOTE:
Private Network Mode (PNM) is always enabled.
When multiple DM switchers are cascaded, assign a unique
system ID to each switcher. PNM uses the system ID of each
switcher to determine the internal IP address used by each
device in the DM system.
NOTE:
Each DM switcher must connect directly to the LAN.
A DM switcher cannot connect to the LAN through another
DM switcher.
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron, the Crestron logo, DigitalMedia, DM, and DM 8G are either trademarks or registered trademarks
of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of
others.
Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2013 Crestron Electronics, Inc.
