Crestron 4-Series, Быстрый старт

Страница: 4 / 6

Attach the IR Emitter
1. Peel off the clear adhesive strip on the back of the IR emitter shell and
the IR mask (if attached).
2. Affix the IR emitter by pressing it firmly to the desired location on the
front panel of the controlled device.
If the IR emitter must be removed and repositioned for any reason, it may
be necessary to replace the adhesive on the IR emitter with a new piece of
two-sided tape.
NOTE: The IR emitter is a pure infrared emitter that does not emit any
visible light. To test that the IR emitter is working properly, trigger an
IR command from the CP4-R. Then, use a digital camera device (such
as a smart phone) to record a video of the IR emitter while it is being
triggered. If the IR signal is visible in the video during playback, the IR
emitter is working properly.
Pair with Apple HomeKit
The CP4-R can be paired with Apple® HomeKit® technology to enable
communication between the Crestron Home system and Apple HomeKit
devices and accessories.
For pairing instructions and to locate the unique QR code required for
pairing, refer to the CP4-R Compliance document (Doc. 8547) that
shipped with your CP4-R.
Install the Setup App
The Crestron Home Setup app is used to configure the Crestron Home
system. The Crestron Home Setup app is available from the App Store®
online store and may be downloaded onto an Apple® iOS® device such as
an iPad® device. An Apple ID is required to download the Crestron Home
Setup app.
For a comprehensive list of iOS® hardware and software versions that
are compatible with Crestron Home, refer to online help article 5655 .
To install the Crestron Home Setup app:
1. Tap the App Store icon
on the iPad device home screen.
2. Tap the search field, and enter the search term "Crestron Home
Setup."
3. Tap Search.
4. Tap the Crestron Home Setup app icon .
5. Follow the prompts to download and install the app to the device.
4
CP4-R
Quick Start
4-Series Control Processor for Crestron Home™ OS