HD-RX-201-C-E Receiver
HD-RX-201-C-E Receiver (Rear)
AM-200 (Rear)
HD-TX-201-C-2-G-E
(Rear)
Display Device
Power Pack
•
Connect a CBL-HD-12 cable to the HDMI input port on the HD-RX-201-C-E and to the HDMI output port on the AM-200.
•
Connect the CBL-CAT5E-50 to the FROM TX port on the HD-RX-201-C-E and to the TO RX port on the HD-TX-201-C-2G-E (if connection has
not previously been made).
•
Connect a CBL-HD-12 cable to the HDMI OUTPUT port on the HD-RX-201-C-E and to the HDMI input port on the display device (not included).
•
Connect the CBL-SERIAL-DB9-L-12 cable to the COM port on the HD-RX-201-C-E and to the serial port on the display device.
NOTE:
The COM port, which is for RS232 communications, is used if the display device does not respond to CEC commands via the HDMI
connection. If using the COM port, apply the settings to the port using the web interface for the device. For details, refer to the DM Lite HD(I)-
MD Auto-Switchers and Extenders Supplemental Guide (Doc. 7797) at
www.crestron.com/manuals
.
•
Connect the CBL-CAT5E-7 to the LAN port on the HD-RX-201-C-E and to the corporate LAN.
•
Connect the included power pack to the 24V 1.25A port on the HD-RX-201-C-E.
AM-200
AM-200 (Rear)
HD-RX-201-C-E (Rear)
Power Pack
•
Connect a CBL-HD-12 cable to the HDMI OUTPUT port on the AM-200 and to the HDMI INPUT port on the HD-RX-201-C-E (if connection has
not previously been made).
•
Connect the CBL-CAT5E-7 to the LAN port on the AM-200 and to the corporate LAN.
•
Connect the included power pack to the 24V 0.75A port on the AM-200.
MPC3-201
PoE
MPC3-201
Connect the CBL-CAT5E-7 to the LAN port on the MPC3-201 and to a Power over Ethernet (PoE) connection on the corporate LAN. PoE can be
supplied by any of the following PoE devices (sold separately):
•
PWE-4803RU PoE Injector
•
CEN-SWPOE-16 16-Port Managed PoE Switch
•
CEN-SW-POE-5 5-Port PoE Switch
Apply Power
When all connections are made, apply power to all of the devices in the system.
Configure Devices
On a computer, use Crestron Toolbox™ software to determine the IP addresses of the AM-200, HD-RX-201-C-E, and MPC3-201. Open a web
browser, navigate to the IP address of each device, and configure the devices as required. For details, refer to the documentation for each device.
For Additional Information
Scan or click the QR code for detailed product information.
EDU-601
For more information, refer to the documents below. All documents can be found at
www.crestron.com/manuals
.
•
AM-200 DO Guide (Doc. 8260)
•
AM-200 Supplemental Guide (Doc. 8254)
•
HD-MD-300-C-E DO Guide (Doc. 7983)
•
DM Lite HD(I)-MD Auto-Switchers and Extenders Supplemental Guide (Doc. 7797)
•
MPC3-201 DO Guide (Doc. 7876)
Compliance and Legal
Original Instructions:
The U.S. English version of this document is the original instructions. All other languages are a translation of the original instructions.
The product warranty can be found at
.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents
Certain Crestron products contain open source software. For specific information, please visit
Crestron, the Crestron logo, 3-Series, AirMedia, Crestron Toolbox, and the MPC logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other
countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks,
and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names
of others. Crestron is not responsible for errors in typography or photography.
©2019 Crestron Electronics, Inc.
Crestron Electronics, Inc.
15 Volvo Drive, Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
Quick Start - Doc. 8436A
(2053314)
01.19
Specifications subject to
change without notice.
