Crestline Motiv Скачать руководство пользователя страница 2

Single Motor Electric Height 

Adjustable Workstation

  120kg load rating 
  Anti-collision safety s overload and overheat 

protection circuits

Please carefully read the instruction manual prior to 

instalment, use and maintenance of the table frame 

to gain a complete understanding of its contents. It 

provides you with important information about the 

safety, use, installation and maintenance of the table.

1.  Unplug the power cord in case of 

smoke, smell or unusual noise.

2.  Make sure no objects or parts 

of the body get caught when 
operating the motor.

3.  The piece of furniture must not be 

adjusted in height if other people 
are located directly in its vicinity.

4.  Do not place any objects or parts 

of the body between fixed or 
movable parts.

Please observe the safety instructions!

Improper operation of the system may 

result in personal injury and cause damage 

to objects!

Warning: In the event of a fault it is possible that the table top moves 

slightly

 

during every attempt whilst operating before the safety switch off

 

activates. Please take care to avoid the possible danger of crushing.

Warning: During all reset procedures the collision protection is not active. 

Please take care to avoid possible danger of crushing.

5.  If an obstacle is encountered 

or if there is a functional fault, 
stop the adjustment immediately 
by pushing any button on the 
handset.

6.  Make sure adjacent objects are 

placed at a minimum distance 
of 25 mm to prevent them from 
being squeezed or sheared!

7.  Ensure that the safety distances 

are 25mm for movable parts (this 
also applies for organisational 
elements which are fitted above or 
underneath the furniture, mounted 
to adjoining walls or building parts 
such as open windows).

8.  The protection against 

uncontrolled movement does not 
prevent objects being trapped! For 
physical reasons, “soft“ obstacles 
are not easily recognised and 
evaluated, if at all!

9.  In case of hitting an obstacle, 

slight damage (scratching, 

pressure marks, etc.) to such 
obstacles may result (table is lifted 
at nominal speed)!

10.  This appliance must not be used 

by any person (including children) 
with limited physical, sensorial 
or mental abilities or failing 
experience and/or knowledge 
unless they are supervised by a 
person responsible for their safety 
or received instructions about 
how to use the appliance. Children 
should be supervised in order to 
make sure that they do not play 
with the appliance.

11.  The manufacturer assumes no 

liability for damage resulting from 
improper use.

12.  After 2 minutes of continuous 

operation the system 
automatically shuts itself off and 
cannot be used for an additional 
18 minutes. This keeps the motor 
from overheating.

Содержание Motiv






Отзывы: