Crest Audio NEXSYS - VERSION 3.0, Руководство пользователя программного обеспечения

Страница: 49 / 76

Crest Audio Inc. NexSys v. 3.0
10. Snapshots
A snapshot is a record of device settings. Settings include levels, mutes, polarity, solo’s,
MIDI patches, NC-module parameters, etc. Once saved, the settings in a snapshot can be
instantly recalled at a later time.
There are two levels of snapshots: one for the entire plan and one for a group .
The snapshot records the control settings of the devices in its domain (either plan or group.)
Snapshots are created, deleted, edited, and updated through the snapshot window.
10.1 Inserting a New Snapshot
The first step in creating a snapshot is to make the system changes you want to snapshot.
Once (plan and/or group) settings have been made, access the snapshot window by select-
ing
Plan | Snapshot | Open or Group | Snapshot | Open from the menu. Note that to
access a group snapshot, you must have the group window open and active before select-
ing the pull down menu. Alternatively, just press the Plan Snapshot button on the NexSys
toolbar or the Group Snapshot button at the bottom left corner of the group window.
Right clicking on the snapshot window will open a pop-up
menu like the one to the left. Pressing the Edit button at the
bottom of the snapshot window will do the same thing.
Select Insert from the menu and an Insert
Snapshot dialog will appear as shown in
the figure. Label the snapshot in the
Name box and assign it a sequence num-
ber. Click OK. To insert another snap-
shot, make the changes you want to the
devices and then repeat the steps outlined
above.
Insert Snapshot Dialog Box
10.2 Recalling a Snapshot
Once saved, snapshots can be recalled in several ways. Double clicking on a snapshot recalls
it. This snapshot is considered active and is denoted by a black arrow to the left. The active
snapshot is defined as the last one that has been recalled. The Up/Down buttons sequential-
ly recall snapshots. The Down button recalls the next snapshot in the sequence. The Up but-
ton recalls the snapshot above the active one. The snapshot list circular, pressing Down at
the last snapshot will recall the first. Similarly, pressing Up on the first will recall the last.
Software Manual Page 10.1