STB Brand
Three-Digit Device Codes w/ VOD
Three-Digit Device Codes w/ DVD
Amino
010, 016, 24
011, 017, 025
Cablevision 020
021
Charter 018
019
Cisco
020, 004
021, 005
Comcast
006, 008
007, 009
Cox 008
009
Direct TV
004, 012 (Bed 1), 014 (Bed 2)
005, 013 (Bed 1), 015 (Bed 2)
Dish Network
032, 036
033, 037
Mediacom 006
007
Motorola 008
009
NEC 022
023
Scientific Atlantic
020
021
DVD Brand
Three-Digit Device Codes
LG® 000
PDI®
015, 016, 023, 024 (modular), 034, 047
RCA®
001, 029, 030
Samsung
008, 025, 038, 042
Miscellaneous Operating Information:
User-specific programming is maintained in the event of dead or removed
batteries. Operation will be restored to the previously programmed
functionality as soon as fresh batteries have been installed.
LED Light Indicator
Either the tv LED or video LED will flash depending on the mode pillow speaker
is operating to indicate following messages.
1. Low Battery: one flash per second. Change the battery when this displays.
2. TV Audio Level Too Loud: four flashes per second. This is only possible
for pillow speaker equipped with internal volume control (IVC). When you
notice this, disconnect the pillow speaker from the station. Wait for the LED to
stop flashing. Press volume up button on the pillow speaker for 10 seconds.
Decrease the volume of the TV to minimum value by using buttons on the TV.
Plug the pillow speaker to the station, and slowly increase the volume of the TV
using buttons on the TV to a maximum level of volume you would like to hear.
If you notice the flashing during the process, disconnect the pillow speaker
from the station and call our Technical Support Department at 1-800-328-
8908.
Operating Entertainment Devices
The Elite Infrared Pillow Speaker will only control those entertainment devices
(TV, DVD, STB) for which it has been programmed. Refer to the programming
section, located earlier in this document, prior to operating. Your pillow speaker
can run in two modes: TV/STB or Video. TV/STB mode can be accessed by
pressing tv button, and it lets you control your TV and STB. Video mode can be
accessed by pressing video button. It either lets you control your DVD player, or
access VOD functions if the service is offered by your cable/satellite TV provider.
You have an option during programming to decide the function of video button.
Operating TV and STB on TV/STB mode
1. Press the button labeled tv to take your pillow speaker to TV/STB mode.
a. The LED above the tv button will flash quickly to show you that you are
now in the TV/STB mode.
2. All buttons associated with the TV and STB will now operate.
a. The power button will turn the TV on or off.
b. The mute button will mute the TV sound.
c. The volume up and volume down buttons increase or decrease the TV
volume. If the pillow speaker is equipped with internal volume control
(IVC), volume is adjusted internally in the pillow speaker.
d. The input button will only work if your particular TV features a special
input, such as A/V or HDMI. Operation of this button is dependent upon
the particular set with which it is used. On sets that do not support this
function, the button will be non-functional.
e. The channel up and channel down buttons sequentially change the
channel up and down on the STB.
f. The number buttons (0 - 9) function as entry keys for direct channel
access of your STB.
g. The up and down arrows are used to navigate the STB menu vertically.
h. The left and right arrows are used to navigate the STB menu horizontally.
i. The select button will select the option highlighted on the STB menu.
j. The info button will give you information about the current channel.
k. The guide button will let view current and future programs offered by
your cable/satellite TV provider.
Stereo headphones are recommended for best performance when the optional
headphone receptacle is in use.
Note: When pressed, each button listed above in a-k above will flash the tv LED,
indicating that the device is in the TV/STB mode and successful transmission of
infrared signal.
Accessing VOD functions in Video mode:
1. Press the button labeled video to take your pillow speaker to Video mode.
a. The LED above the video button will flash to show you that you are now in
the
Video
mode.
2. All buttons associated with the VOD will now operate.
a. The up and down arrows are used to navigate the STB menu vertically.
b. The left and right arrows are used to navigate the STB menu horizontally.
c. The select button will select the option highlighted on the STB menu.
d. The info button will give you information about the current channel.
e. In Video mode, the majority of number keys also include a light gray shape
below the number. These commonly used shapes will operate as indicated
to the right:
i. The play button (5-key) will start playing the video.
ii. The
stop button (8-key) will stop playing the video.
iii.
The
skip ahead button (6-key) will fast forward the video.
iv.
The
skip behind button (4-key) will rewind the video.
v. The
pause button (0-key) will pause the video.
f. The input, channel up, channel down, guide and number buttons
1, 2, 3, 7 and 9 will become non-functional while in the Video mode.
g. The power, volume up, volume down and mute buttons will continue to
operate
TV.
Note: Pressing a valid button will flash the video LED, indicating that the device
is in the Video mode and successful transmission of infrared signal.
Operating DVD player in Video mode:
1. Press the button labeled video to take your pillow speaker to Video mode.
a. The LED above the video button will flash to show you that you are
now in the Video mode
2. All buttons associated with the DVD will now operate.
a.
The power button will turn on or off the DVD player.
b.
The select button is used in the main menu of the DVD player to select
what you want to view on the DVD.
i.
The up and down arrows are used to navigate this menu vertically.
ii.
The
left and right arrows are used to navigate this menu
horizontally.
c. In Video mode, the majority of number keys also include a light gray
shape below the number. These commonly used shapes will operate as
indicated
below:
i. The
play button (5-key) will start playing the DVD.
ii. The
stop button (8-key) will stop playing the DVD.
iii. The
skip ahead button (6-key) will fast forward the DVD.
iv. The
skip behind button (4-key) will rewind the DVD.
v. The
chapter ahead button (9-key) will make the DVD jump to the
next
chapter.
vi. The
chapter behind button (7-key) will make the DVD jump to
the previous chapter.
vii.
The pause button (0-key) will pause the video.
d.
The input, channel up, channel down, info, guide and number
buttons 1, 2 and 3 will become non-functional while in the Video mode.
e.
The
mute, volume up and volume down buttons will continue to
operate
the
TV.
Note: Pressing a valid DVD button will flash the video LED, indicating that the
device is in the Video mode and successful transmission of infrared signal to the
DVD player.
Room Environments with Multiple Beds and
STB-TV combination:
There are two equipment configuration options available when using the Crest
Elite Infrared Pillow Speaker in room environments with multiple beds and
STB-TV combination. The grade/type of TVs in use (health-grade, commercial or
consumer) and a STB feature will determine the feasibility of the options.
When healthcare-grade or commercial TVs are in use, STB-TV combinations
and the pillow speakers can be paired using the STB and TV’s multiple IR code
capability. Pairings are referred to as Bed 1, 2, 3, 4, etc. With this configuration,
one TV is set to Bed 1 and then the pillow speaker that will be used with that
particular TV is programmed as Bed 1. Another TV and pillow speaker in the
same room is paired in the same way as Bed 2. Along with the TV, the STB used
in the room should also have the feature of multiple IR code capability and
the pairing process of STB and pillows speaker is the same as described above
for TVs. This pairing method is continued until each STB-TV combination and
pillow speaker in the same space has been paired.
Alternatively, TVs of any type (healthcare-grade, commercial and consumer)
and STBs will function with the Crest Elite Infrared Pillow Speaker so long as no
TV and STB in the same room accepts the same IR code.
STB-TV combination:
IPTV refers to the delivery of the TV content/channels via Ethernet. Usually
there is a cable box placed between the TV and the Ethernet connection which
is equipped with an IR receiver. New smart TVs may include the cable box
inside the TV. Regardless of the set-up, Crest IR Pillow Speakers are capable of
operating the IPTV.
B-39229 / Rev. 09 / 03.21.19 / Page 2 of 2
