Attach to the TOP holes of your flat panel
STEP 1 – SELECT THE CORRECT SCREW SIZE FOR ATTACHING THE STRAP TO THE BACK OF
YOUR TV
1. The Hardware Pack contains 4 different sized bolts (#5 to 11) for attaching the strap to your TV.
2. Hand thread these bolts into the HIGHER threaded holes in the back of your TV so you can determine the correct
size.
3. If none of these bolts fit you will need to purchase correct ones from your local hardware, Crest only supply’s the
most popular sized bolts.
STEP 2 – POSITIONING YOUR FLAT PANEL TO THE DESIRED POSITION
1. Before attaching the strap to your TV and Furniture please ensure that your TV is sitting in the correct position.
2. If you have decided to attach the strap to your wooden shelf, mark and drill two 2mm (wide), holes in the appropriate
position then attach using wood screws #2…DO NOT over tighten screws.
3. For attaching to a wall, mark desired position. When attaching to a cavity wall ensure that the connector is screwed into
the STUD (use stud finder to find location) then pre-drill holes using a 2mm bit followed by screw #3. If going into a
Masonry wall pre-drill holes with a 6mm Masonry Drill Bit then lightly tap Concrete Anchor #4 into these holes. Once
this is done you can then use screws #3 to attach connector. DO NOT over tighten screws.
M6 or M8
M4, M5
Screws
WOOD
