background image

5925 Heisley Road • Mentor, OH 44060-1833

Holding Cabinet

FL-2331-DOM

Rev. 10 (12/11)

Page 3 of 8

WARNING

BEFORE

 cleaning the cabinet:

1.  Unplug the cabinet from the wall.

2.  Allow cabinet to cool.

1. Do 

NOT

 use abrasives (steel wool) or harsh 

chemicals (chlorine, bromine, iodine or ammonia).

2. Do 

NOT

 use a water sprayer (pressure sprayer) to 

clean the cabinet.

Cleaning hints:

1. Wipe up spills as soon as possible.

2. Clean cabinet daily to avoid heavy dirt build-up.

3. Make a test spot with cleaner:

a) Follow manufacturer’s directions on cleaner.

b) Do not mix cleaners.

c) Avoid drips and splashes.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE

PERSONNEL ONLY

RISK OF FIRE OR ELECTRIC SHOCK

DO NOT OPEN

WARNING

HOW TO CLEAN THE UNIT:

Soil

Cleaner

Method

CABINET

Inside and 

Outside

(Stainless Steel)

DAILY CLEANING

Mild detergent and hot 

water.

1. Sponge on with cloth.

2. Rinse with water.

3. Wipe dry.

STUBBORN SPOTS AND 

STAINS

Mild abrasive made for 

stainless steel.

1. Apply with damp sponge or cloth.

2. Rub lightly.

3. Rinse with water and wipe dry.

BURNT-ON FOODS OR 

GREASE

Chemical oven cleaner for 

stainless steel.

Follow oven cleaner manufacturer’s 

directions.

HARD WATER SPOTS 

and SCALE

Vinegar

1. Swab or wipe with cloth.

2. Rinse and dry.

*Mild detergents include soaps and non-abrasive cleaners.

Note:

 Gaskets are removable for cleaning.

MAINTENANCE INSTRUCTIONS

Содержание H138NPSCDOMMQ Series









Отзывы: