5925 Heisley Road
•
Mentor, OH 44060-1833
877/CRES COR (273-7267)
•
440/350-1100
Fax: 440/350-7267
•
www.crescor.com
Dish Dolly
Assembly
FL-2274
Rev. 2 (2/04)
Page 3 of 4
Figure 2
UNDERNEATH BASE SHOWN
HOW TO ASSEMBLE DOLLY:
1. Remove, unwrap and layout all the parts from the box.
2. Assemble Items “A” & “B” (per Figure 1):
a. Remove two (2) screws as noted.
b. Slide “B” in between the two plates on Item “A”.
c. Line up the holes and screw together with the two screws
removed in step “a”.
(Put these two items aside after assembly.)
3. Assemble the casters to Item “C” (the green post):
a. Insert
caster
stem
into the tube on Item “C”.
b. Screw together using the (8) M6 hex washer head
thread forming screws.
4. Assemble Item “D” to Item “E” (per Figure 2):
a. Pull apart the braces Item “E” to form an “X”.
b. Take Item “D” base and turn it over to show the underneath.
c. Place the braces on the gussets on the bottom of the base.
d. Line up the hole to the plug nut in each corner and screw
together using the (4) phillips head screws & lockwashers provided.
(cont. next page)
ITEM “D”
BASE
WING THUMB SCREWS
WITH LOCKWASHERS
CASTERS
ITEM “E”
“X” BRACE
PHILLIPS HD. SCREWS
WITH LOCKWASHERS
#1/4-20 25mm (1”) LONG
ITEM “B”
REMOVE SCREWS
ITEM “A”
