Ovens
FL-2374-D
Rev. 2 (6/14)
Page 3 of 13
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
5925 Heisley Road • Mentor, OH 44060-1833
INSTALLATION INSTRUCTIONS
VENTING YOUR OVEN:
1. The purpose of ventilating hoods is to direct and
capture smoke, grease-laden vapors, heat, odors, or
fumes.
2. Low temperature equipment (maximum
temperature 250°F/121°C) does not produce heat,
odors, fumes, grease-laden vapors or smoke and is
not required to be vented.
3. Most jurisdictions consider our low-temperature
ovens (maximum temperature is 350°F/177°C) as
low-heat appliances not requiring vent hoods.
4. Installation must conform with local codes. The
authority having jurisdiction of enforcement of
the codes will have the responsibility for making
interpretations of the rules.
SPECIFICATIONS:
All units are rated 3000 watts/2650 watts at 208 Volts/240 Volts
CMP MODEL NOS.
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD
POWER SUPPLY REQUIREMENT
SINGLE OVENS
Volts
Ph
Hz.
Amps
Volts
Amps
Ph
Wire
Volts
NEMA
500CHSSD
500CHALD
750CHSSD
1000CHSSSPLITD
208
240
208
240
1
1
1
1
60
60
60
60
14
11
14
13
208
240
208
240
20
20
20
20
1
1
1
1
2
2
2
2
208
240
208
240
6-20P
6-20P
6-20P
6-20P
500CHSSD3
500CHALD3
750CHSSD3
1000CHSSSPLITD3
208
240
208
240
3
3
3
3
60
60
60
60
8
7
8
7
208
240
208
240
20
20
20
20
3
3
3
3
3
3
3
3
208
240
208
240
L15-20P
L15-20P
L15-20P
L15-20P
SPECIFICATIONS:
All units are rated 2000 watts.
CMP MODEL NOS.
ELECTRICAL SPECS
(AC SERVICE)
ELEC. LOAD
POWER SUPPLY REQUIREMENT
SINGLE OVENS
Volts
Ph
Hz.
Amps
Volts
Amps
Ph
Wire
Volts
NEMA
500CHSSD120
750CHSSD120
1000CHSSSPLITD120
120
1
60
16.6
120
20
1
2
120
5-20P
Model number “AL” is aluminum outer body with stainless steel doors and interior.
All models designed for AC Service. Model number may include a variety of informational suffix letters.
NOTE
: OVENS NEED TO BE INSTALLED BY A
QUALIFIED PERSON.
For models rated at 208/240 Volts:
Check the voltage selector switch which is under an access
cover on the back of the oven near the power cord.
Flip the switch “UP” for 208 Volts
Flip the switch “DOWN” for 240 Volts
MAKE SURE THE SWITCH POSITION MATCHES
YOUR POWER SOURCE.
