Model 27 Fitting Instructions
5.
Unfasten the Waist Belt & position the Understrap
[f]
centrally on the seat cushion
6.
If the passenger is under 135cm place a Booster Seat or Cushion on top of the Understap to comply with child seat safety
legislation
(See last page for further information).
7.
Position the Back Pad
[g]
& Body Harness on the seat so that the waist belt will be in line with the waist when the passenger sits
down.
8.
The harness is now ready for the passenger to be seated.
9.
With the passenger sitting in the most upright position as possible, bring their arms through the shoulder straps
[d]
.
10.
Now bring the understrap
[f]
up between the legs and loop it back onto the waist belt over the buckle
[e].
11.
Connect the waist belt buckle
[e]
to fasten the harness. Position the buckle centrally at waist level on the passenger.
Nb. The Waist Belt can move freely through the leatherette Back Pad
[g]
12.
Adjust all straps to fit tightly yet comfortably by pulling the tail
-
ends of strapping through the Adjuster Buckles
[i]
.
13.
If using the Houdini Stop Chest Strap
[j]
, attach to Shoulder Straps
underneath the Adjuster Buckles
[i]
.
See instruction provided
.
14.
Ensure that the three Comfort Pads
[g]
are in position over the Adjuster Buckles
[i]
on the Shoulder & Under Straps.
15.
Fasten the vehicle safety belt over the top of the Model 27 Harness
.
16.
To remove the passenger from the harness
-
Unfasten the buckle on the waist belt at the centre
-
front.
NB. A fitting video can be found on our website
-
https://crelling.com/model
-
27.html
1.
If fitting a brand new harness, remove any Rubber Bands & unfasten the two Horizontal Fixing Straps
[a]
.
2.
Place the back pad
[g]
of the harness against the front of the back rest & pass the two the Horizontal Fixing Straps around the seat
back.
3.
Feed the tail
-
ends of the two Horizontal Fixing straps through the Aluminium Bar Buckles
(see diagram [b])
& pull to tighten
around the seat back as securely as possible.
4.
Each tail end should then be passed through the Sliplock Slide
[c]
to prevent the Fixing Straps
[a]
from loosening during transit.
[b] 50mm Aluminium
[c] 50mm Sliplok slide
[a] Horizontal Fixing Straps
[d] Shoulder Straps
c/w Velcro
Comfort Sleeves
[e] Waist Belt Buckle
[f] Understrap
[g] Back Pad
