Pontoon
Nylon Strap
Frame
D-Ring
VI. ATTACH STRIPPING APRON TO FRAME
1. Position Stripping Apron at top of Leaning Bar (see figure 3).
2. Wrap hook & loop strap around Leaning Bar and snugly strap down.
3. Waist Belt for Stripping Apron is provided so fisherman can wear stripping apron if desired.
VII. ATTACH SIDE STORAGE POCKETS TO FRAME
1. Position Side Storage Pockets along Left Frame Member and Right Frame Member of Rear Rowing Frame (see figure 3).
2. Wrap lower straps around bottom rail of frame and strap down.
3. Wrap straps around upper rail frame and strap down.
VIII. ATTACH UNDER THE SEAT ZIPPERED MESH STORAGE
BAG & BEHIND THE SEAT ZIPPERED MESH STORAGE BAG.
1. Position Zippered Mesh Storage Bags on frame. Smaller bag under Tall Seat Support Frame Member, with zipper facing forward.
Larger bag behind Tall Seat Support Frame Member. (see figure 3)
2. Attach bags to frame using ladder lock buckles and straps to wrap around frame.
VIIII. ROD HOLDER TO FRAME
1. Rod Holder attaches to frame anywhere a Snap Pin assembly is found.
2. Recommended location is where Cargo Deck attaches to Left or Right Frame Member (see figure 2).
Figure 3a Valve Insert detail
Top valve cap
Valve assembly
Valve plate
Bladder
Figure 3
Assembled ODC XR 12
A . Stripping Apron
B. Under the Seat, Zippered Mesh Bag
C. Behind the Seat, Zippered Mesh Bag
D. Side Storage Pocket
E. Side Storage Pocket
F Valve Cover
G. Oar Stop
H. Anchor Line Storage Bag
ODC XR 12
Transom for
trolling motor
A
B
C
D
G
E
Cam Lock
Buckle
H
F
