2 of 2
LPN00283X0001A0_E
www.cree.com/lighting
© 2015 Cree, Inc. All rights reserved. For informational purposes only. Content is subject to change.
See www.cree.com/lighting/products/warranty for warranty and specifications. Cree® is a registered trademark, and the Cree
logo is a trademark of Cree, Inc. NEMA® is a registered trademark of the National Electrical Manufacturers Association
ELECTRICAL CONNECTIONS
PHASE TO NEUTRAL WIRING
STEP 1:
Make the following Electrical Connections to the terminal block:
a. Connect the black fixture lead to the voltage supply position of
the terminal block.
b. Connect the white fixture lead to the neutral supply position of
the terminal block.
c. Connect the green or green/yellow ground lead to the green wire
position of the terminal block.
STEP 2:
Push excess supply wires into pole.
STEP 3:
Close cover, making sure that no wires are pinched and latches are
fully engaged.
LINE
GREEN
LINE-BLACK
GROUND-GREEN
NEUTRAL-WHITE
NEUTRAL
SUPPL
Y WIRING
LUMINAIRE
TERMINAL
BLOCK
NEMA® RECEPTACLE (OPTIONAL)
STEP 1:
DO NOT
loosen/tighten torx screws for the NEMA® receptacle.
STEP 2:
Rotational adjustment of the photo control is
tool-less.
STEP 3:
Engage/install photo control into NEMA receptacle on top of the fixture.
STEP 4:
Firmly rotate photo-control with its photo-eye approximately in the ‘N’ north
direction. Some photo-controls operate best somewhere between NW and NE.