Factory reset - Returns all settings to factory pre-sets.
• Press & hold Enter button for 5 seconds
• Press Down or Up to view Factory reset screen
• Press Enter to see factory reset options
• Press Down or Up to toggle between Y and N for reset.
• Press Enter to confirm
Factory reset sequence will now take place.
To reset the time/date see “Setting the Time and Date” on page 12.
Hold the Enter button for 10 seconds to cancel the error message
NOTE:
In environments where the product may read sudden decreases in temperature, this feature
may activate in error. This can occur in drafty or poorly insulated environments as well as if the
heater is undersized for the room. This feature should be disabled using the instructions above
if activating for reasons other than the intended purpose. If you think that your environment
is not as described here and this feature is activating, please contact our customer care team
with the details on the rear page of this document.
If Open Window detection is activated an Error Message will be displayed if the Heater
detects an open Window “Err 2” will be displayed and the backlight & icon will flash.
22