Page 12
b)
What to do if I go away
Credanet II includes a “Holiday” option to take care of this
Open the pull down flap on the front of your Credanet II controller.
•
Slide the
SET
switch to
HOLIDAY
•
Use the left hand
+
and
–
buttons to choose the
number of days you will be away. The display
will show the number of nights plus the day on
which the heating will start to work again.
E.g. This display shows a holiday setting of 5 days
with the heating working again on Saturday
•
Slide the
SET
switch to
PROG RUN
NOTES
•
In holiday mode, all zones will show “14” (°C) in the display, and will only supply enough heat to
protect your house from frost as required.
•
If you return from holiday early, or wish to cancel the setting, simply press any of the SELECT
buttons.
c)
Switching the heating off
The heating in a Credanet II system can be switched off using the controller
At the controller:
Open the flap on the controller and press the SELECT button for that zone:
•
The slider switch stays on
PROG RUN
•
Use the required SELECT button to turn that
zone Off
E.g. This display shows Zone 1 switched Off while
Zones 2 and 3 are running normally.
•
Zone 1:
Use the left hand SELECT button
•
Zone 2:
Use the middle SELECT button
•
Zone 3:
Use the right hand SELECT button
•
To switch the zone back on, open the flap and
Press the SELECT button for that zone again.
d)
Switching off an individual heater
Storage heaters use two supplies and Panel heaters use one. These must be left on all the time.
(Individual heaters should only be switched off if a safety issue arises).
What happens if either of the switches next to the heater is switched off
•
The controller cannot calculate when the cheap rate electricity is available
•
The Storage heater will not be able to store any heat, even if only one switch is turned off.
Содержание Credanet II
Страница 8: ...Page 8 Your Heating Plan Table...