Creator PGMIII Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 57

Creator PGMIII Скачать руководство пользователя страница 2

Meaning of the symbols

■ Safety Instruction
Symbols are used in the Manual and devices, referring to the possible risk to users or others,as well as
the damage to property, for helping you to safely and properly use the devices. The instruction and the
implications are as follows. Please make sure your correct understanding of these instructions before
using the Manual.

To remind user to conduct according to the
attached

operation

and

maintenance

instructions. If ignore these information, death or
injury could possibly happen.
To remind the user that the risky uninsulated
voltage in the device could caused electric
shock to human.
CE authentication indicates the product is in line
with the EU safety regulation, and for assurance
of safety use.
SGS Authentication indicates the product has
reached the QC standard of the global-biggest
Swiss universe surveyor.
This product has acquired the ISO9001
International

Quality

Authentication

(Authentication authority: Germany Rheinland
TUV)
Caution: To avoid electric shock, please don't
open the case, nor put the useless parts in it.
Please contact with qualified service staff.

■ General Information Instruction

List the situation of causing unsuccessful
operation or setup, and relevant information
needed to notice.

«
1
2
3
4
...
»

Содержание PGMIII


























































Отзывы:

Нет отзывов