4. Upon finishing, the print head and heated bed will be automaticallycooling down.Only
remove the printed object from the heated bedwhen it is cooled completely.Pull the print
platform to the front side,and use scraper to carefully remove the object as shown in
Fig.20.Never direct scarper to your hands.
Please be mindful that the nozzle and heated bed are still hot afteroperation.
Fig.20
5.ELF PRO 3D printer equipped with Carbon Silicon Crystal Tempered Glass: (a novel print
platform)which could be used for very long time without adding any maskingtape, "hair
spray" or glue stick.Customers only have to clean it byalcohol or similar after every few prints.
suggested nozzle (print) temperature for PLA: 190-210 C, ABS:230-240
℃
, Bed
temperature for PLA: 60
℃
, ABS: 8o-100
C. (it issuggested to disable the model
cooling fan for ABS in Advancedsettings of cura)
After operation, do not immediately switch off the printer.Only turn itoff after the nozzle cools
to room temperature, because the heat sinkstill needs fan for cooling to minimize the risk of
nozzle clogging.