MLK-I-05-0*-0001
User
’
s Guide
Rev.:1.0
热 键 科 技 ( 深 圳 ) 有 限 公 司
MLK Industries (ShenZhen) Limited
第
7
页
共
7
页
制作:曹新伟
日期:
20030531
Installing Hardware
Step 1:Insert batteries into the WCU90D Optical Mouse
1. Holding the mouse in one hand,push the battery compartment cover catch downwards with the
other hand,and then remove the cover.
2. Insert two AA batteries according to the directions in the battery compartment,
3. Close the battery compartment cover and then push the catch upwards to lock the compartment
cover.
Step 2:Insert batteries into the WCU90D Wireless Keyboard
1. Turn the keyboard over.
2. Slide the battery compartment cover downwards.
3. Insert two AA batteries according to the directions in the battery compartment.
4. Slide the battery compartment cover upwards to close it.
Step 3: Connect the WCU90D RF receiver
1. Turn on your computer.
2. Connect the USB connector on the RF receiver to the USB port on your computer.
3. Place the RF receiver at least 8 inches(20cm) from your computer or monitor.
Step 4: Turning on the RF receiver