Creative Video Blaster WebCam Go, Руководство пользователя

Страница: 19 / 47

1-6 Installing WebCam Go
Installing Software 1. Switch on the computer.
2. When the Add New Hardware Wizard
dialog box appears, click the Next button.
The dialog box similar to Figure 1-5
appears.
3. Click the Search for the best driver for
your device (Recommended) option and
then click the Next button.
The dialog box similar to Figure 1-6
appears.
4. Insert the WebCam Go CD into your
CD-ROM drive.
Note: If the setup program runs
automatically, exit from the program.
5. Select the Specify a location check box and
type D:\DRIVERS (where D: represents
your CD-ROM drive) in the box provided.
Some of the steps in the
installation process may not
occur in the same sequence as
described here.
Figure 1-5: The Add New Hardware Wizard dialog box.
Figure 1-6: Specifying a location.