manualshive.com logo in svg

Creative V.92 PCI DI5633 Modem Blaster, Начало работы, Страница: 44 / 55

Поделиться
Скачать
Creative V.92 PCI DI5633 Modem Blaster Скачать руководство пользователя страница 44

Troubleshooting and FAQs B-2

Problems With Your 
Modem

The modem fails to accept commands to dial or answer a call.

Cause

There may be an improper telephone line connection.

Solution

Make sure the telephone cable is attached to the Telephone Line jack, and that the 
telephone is connected to the Phone jack on your card.
Also check that all devices are turned on.

There is interference on the telephone line that is connected to the modem.

Solution

Try moving the telephone line away from any power source, monitor, printer, or 
any computer cable.

The modem cannot connect to the Internet at 56,000 bps.

Cause

This may be due to line conditions in your area. Due to FCC regulations and/or 
line conditions, it is not always possible to achieve the maximum data rate.

Solution

Try moving the telephone line away from any power source, monitor, printer, or 
any computer cable and remove other telephone equipment from the line.

The modem or communications software fails to detect that the remote user has 
hung up.

Cause

The modem or communications software relies on the dial tone, busy tone, or 
silence period to detect that a remote user has hung up. This detection may fail 
due to one of the following reasons:

❑

Your local telephone system does not generate the dial or busy tone when the 
remote user hangs up.

❑

The silent period for the modem or communications software to detect that the 
remote user has hung up is not long enough.

Содержание V.92 PCI DI5633 Modem Blaster
























































Отзывы:

Нет отзывов