Creative Sound Blaster Audigy non-SB1394, Руководство пользователя

Страница: 18 / 71

Installing Hardware 1-5
Installation Steps
Step 1: Prepare your
computer 1. Turn off your computer and all peripheral devices.
2. Touch a metal plate on your computer to ground yourself and to discharge any
static electricity, and then unplug the power cord from the wall outlet.
3. Remove the computer cover.
4. Remove the appropriate number of metal brackets from unused PCI slots as
shown in Figure 1-4. Put the screws aside for use later.
Turn off the main power
supply and disconnect your
computer’s power cord.
Systems using an ATX power
supply unit with soft power
off may still be powering the
PCI slot. This can damage
your audio card when it is
inserted into the slot.
Remove any existing audio
card or disable the onboard
audio chipset. For more
information, see “Problems
with Multiple Audio Devices”
on page B-7.
PCI slots
Figure 1-4: Removing metal bracket
ISA slots
metal
bracket
PCI slots
ISA slots
metal
brackets
Sound Blaster
Audigy (SB1394)
Sound Blaster
Audigy (non-
SB1394)
Remove two adjacent
metal brackets
Remove a
metal bracket
Remove two adjacent
metal brackets