Creative Sound Blaster Audigy 2 Platinum eX, Руководство пользователя

Страница: 56 / 74

General Specifications A-4
Connectivity
Sound Blaster
Audigy 2 card
Audio Inputs
❑
One line-level analog Line input via stereo jack on rear bracket
❑
One mono Microphone analog input via stereo jack on rear bracket
❑
CD_IN line-level analog input via 4-pin Molex connector on card
❑
AUX_IN line-level analog input via 4-pin Molex connector on card
❑
TAD line-level analog input via 4-pin Molex connector on card
❑
CD_SPDIF digital input via 2-pin Molex connector on card
Audio Outputs ❑
DIGITAL OUT via 4-pole 3.5 mm minijack on rear bracket
❑
Three line-level analog outputs via 3.5 mm minijacks on rear bracket: front, rear,
and rear center/center/subwoofer Line-Outs 1, 2 and 3
❑
Stereo headphone (32-ohm load) support on Front Line-Out
SB1394/FireWire Inter-
faces ❑
One 2 x 5 pin Internal SB1394/FireWire connector on card
❑
One 6-pin SB1394/FireWire port on rear bracket
The 6-pin SB1394/FireWire
connector/port has a 3 watt
maximum power output.
Connect only one high power
usage device such as the
IEEE 1394 hard disk and CD-
RW drive to this port unless
it is self-powered.