17
Connect any portable device easily using a 3.5mm 3-pole cable. This connector is located behind the front
panel flap for your convenience. (Optimized for 1Vrms Input levels)
6. Analog
c
7. SD/microSD Cards
B
Insert an SD or microSD card to playback media directly from
the Sonic Carrier.
Press
SD
on the remote control or main unit to select which
SD/microSD card to use.
Press and hold
SD
to switch to SD direct music playback mode.
SD
Micro
SD
Wi-Fi Setup
A pair of stereo Line In connectors are located on the back panel. (Optimized for 2Vrms input levels)
* Add the Sonic Carrier to the same Wi-Fi network as your phone, tablet or PC.
Connecting to your Wi-Fi Network
1. Ensure the Sonic Carrier is powered on and connected to your TV.
2. Press
HOME
to display the Android video engine home screen.
3. Select on the top right corner of the home screen using the
cursor
and
OK
buttons on the
remote control.
4. Select .
5. Select the desired Wi-Fi network* to connect to, enter the password and click
Connect
.
If the network connection is unsuccessful, please ensure that WPA/WPA2 encryption is used. This could be checked
and configured on your router.
3.5mm 4-pole cable (not included)
RCA cable (not included)
Wi-Fi Audio and Video
Once connected, select
Wi-Fi
to enjoy high quality audio over DLNA or from your mobile device using the X-Fi Cast app,
or press
HOME
to acccess the Android Video Engine.
A Wi-Fi connection is required to support the Sonic Carrier app and to perform auto room calibration.
Please perform the Wi-Fi setup even if you intent to use Ethernet as the primary network connection