Creative SB0350 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 141

background image

LIMITATION OF LIABILITY

In no event will Creative Technology Ltd., or anyone else involved in the creation, production, and/or
delivery of this software product be liable to licensee or any other person or entity for any direct or other
damages, including, without limitation, any interruption of services, lost profits, lost savings, loss of data,
or any other consequential, incidental, special, or punitive damages, arising out of the purchase, use,
inability to use, or operation of the software, and/or licensee application, even if Creative Technology Ltd.
or any authorised Creative Technology Ltd. dealer has been advised of the possibility of such damages.
Licensee accepts said disclaimer as the basis upon which the software is offered at the current price and
acknowledges that the price of the software would be higher in lieu of said disclaimer. Some states do not
allow the limitation or exclusion of liability for incidental or consequential damages so the above
limitations and exclusions may not apply to you.

Information in this document is subject to change without notice. Creative Technology Ltd. shall have no
obligation to update or otherwise correct any errors in the manual and software even if Creative
Technology Ltd. is aware of such errors and Creative Technology Ltd. shall be under no obligation to
provide to Licensee any updates, corrections or bug-fixes which Creative Technology Ltd. may elect to
prepare.

Creative Technology Ltd. does not warrant that the functions contained in the manual and software will be
uninterrupted or error free and Licensee is encouraged to test the software for Licensee's intended use
prior to placing any reliance thereon.

Copyright 1993-1996 by Creative Technology Ltd. All rights reserved.

Sound Blaster, Sound Blaster Pro, Sound Blaster 16, and Wave Blaster are trademarks of Creative
Technology Ltd.

IBM is a registered trademark of International Business Machines Corporation.

MS-DOS is a registered trademark and Windows is a trademark of Microsoft Corporation.
All other products are trademarks or registered trademarks of their respective owners.

«
1
2
3
4
5
...
»

Содержание SB0350














































































































































Отзывы:

Нет отзывов

Похожие инструкции для SB0350

Бренд: Vivanco Страницы: 22

Бренд: StarTech.com Страницы: 9

Бренд: Advantech Страницы: 38

USB-SoundBox 7.1

Бренд: Conrad Electronic Страницы: 4

VScom 100E PCIex

Бренд: Vision Systems Страницы: 40

Бренд: Z-Com Страницы: 20

Бренд: Digigram Страницы: 33

Бренд: Digitus Страницы: 2

SoundWave 32Pro

Бренд: Orchid Страницы: 67

Бренд: ICS Advent Страницы: 25

Бренд: CalDigit Страницы: 8

Бренд: Datapath Страницы: 2

Бренд: Aim Страницы: 76

PCI-Express 00049246

Бренд: Hama Страницы: 3

Бренд: General Standards Corporation Страницы: 42

Бренд: CNET Страницы: 2

Бренд: CNET Страницы: 2

Бренд: CNET Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды