Creative Blaster CB5722, Руководство пользователя, Страница: 54 / 57

Frequently Asked Questions B-7
To resolve this problem, prompt the remote user to respond. This may, however,
result in a long delay before the communications software responds to the remote
user hanging up. To minimize this delay, modify the following settings:
• Voice message recording time
• Number of prompts
• Time to wait for a response after prompting
Where can I locate the AT Command set for my modem?
The AT Command set can be found on the Installation CD in the atcomm.txt file.
While connecting to the Internet using Dial-up Networking, a Serial Port
or Fax connection error message appears. Why?
You are using more than one service that utilises the same COM port. You can only
use the dial-up networking, serial port or fax service at any one time.
One of the following may have occured:
• You tried launching Bluetooth Fax services after connecting to the Internet
using Dial-up Networking.
• You tried launching Bluetooth serial port services after connecting to the
Internet using Dial-up Networking.
Difficulties with
Modem-On-Hold
Why is my Internet connection lost after I make outgoing phone calls?
If your phone service does not include Three-Way Call, your Internet connection
will be lost when you make outgoing phone calls using the NetWaiting application.
Contact your phone company for more information about Three-Way Call.
In addition, your ISP will need to support Modem-On-Hold if you are to use its
features. Contact your ISP and check for Modem-On-Hold support. If your ISP
does not support Modem-On-Hold, you may wish to disable Call Waiting before
going online. Your modem can be set to automatically disable Call Waiting while
you are online.
To disable Call Waiting in Windows XP (in Classic View) and Windows 2000
1. Click Start
→
Control Panel or Start
→
Settings
→
Control Panel .
You may need to check
with your local
telephone company for
the correct code to
disable Call Waiting.