Creative audigy Rx, Руководство пользователя

Страница: 40 / 53

3. Click the OK button. The added effect would appear on the Effects list.
A maximum of four Effects can be applied.
4. Repeat Steps 1 - 3 until you are satisfied with the configuration, then save the settings of an audio
effect.
Changing the Type of Effect
1. Click the Type entry on the Effects list
2. Select from the dropdown list.
Playing the Effect-applied sound into another channel
1. Click the Play Into entry on the Effects list.
2. Select from the dropdown list.
Testing an Effect and changing its Amount
See Managing your Audio Effects Settings
Changing an Effect's Parameters
l
Double-click the Effect . OR
l
Select the effect from the list, and then click the Parameters button.
See Modifying an Audio Effect's Parameters for details.
Removing an Effect from the Audio Effect
Click the Effect , and then click the Remove button.
Notes
l
When you select the Always Save Changes Automatically checkbox on the Options page , your
revised settings will be saved when you quit from Sound Blaster Audigy 5/Rx EAX Studio . You
cannot revert an audio effect to its last saved settings unless you clear this checkbox.
l
Original Sound , Reverb and Chorus are default factory effects that cannot be deleted. The Save ,
Export and Delete buttons are disabled.
l
To set the amount of effects to apply at the audio source level, go to the Source page.
l
The overall amount settings for effects is a combination of the Master Effects settings and the
Source Effects settings.
Using Your Sound Blaster Audigy 5/Rx EAX Studio 40