Creative Playthings Playtime 60084-101 Скачать руководство пользователя страница 6

Страница: 6 / 6

Assembly

60084-101 MonkEY BArS
19865-100 rev C (09-17)

Page 6

aSSEMBLy InSTruCTIOnS

STEP 11 – Side Supports:

Use one 1/4 x 2" Hex Bolt Assembly with a Short Weld nut

to fasten one Side Support (D) to one end of the Base rail.

Swing the Side support into place and secure to the adjacent

End Ladder rail using one 1/4 x 2-1/2" Hex Bolt Assembly.
Fasten the remaining Side Support to the other end of the

Base rail and other End Ladder rail in the same manner.

2" Hex Bolts with

Short Weld nuts

2-1/2" Hex Bolts

STEP 10 – Ground Stakes:

Make sure the Monkey Bar stands straight out from the gym

and is sitting firmly upright on level ground.
Hammer two Ground Stakes (k) next to the End Ladder rails

as shown. Secure each stake with two #8 x 2-1/2" Screws

through the pre-drilled holes.
note: Do noT use concrete to set Ground Stakes. Pound a

metal spike or rod into the ground to start a hole in hard or

rocky ground.

Check all Fasteners and clear the area of all tools or other

obstructions before allowing children to use the play structure.

Содержание Playtime 60084-101






