Createbot MAX, Инструкция

Страница: 10 / 15

Recommended using the following parameters to printing your models,you also can adjust
the parameters for your needs.
9
Picture1
Note:
When selecting a support type, it is possible to determine whether it is
necessary to add partial support or entire support or without support by
observing the model or slice interface. But in principle it is better to avoid
support or reduce support.Rotate model can be used to avoid or reduce the
purpose.
When selecting the type of platform attachment, the edge or grid can
be appropriately added according to the size of the land area and the height
of the model.
Single Extruder
Dual Extruder