Create FLOWOOD STYLANCE, Руководство пользователя

Страница: 9 / 64

9 ENGLISH
Tip : To prepare for threading electrical wires through the downrod, apply a small piece of
electrical tape to the ends of the electrical wires. This will keep the wires together when
threading them through the downrod.
•
Loosen the fixing screws and nut at the top of the motor housing. Remove the pin and bolt
from the downrod (if you have not already done so). Slide the downrod through the canopy.
• Tread electrical wires through the downrod and pull extra wire slack from the upper end
of the downrod.
• Place the downrod into the motor housing yoke and reinsert the pin and bolt that were
previously removed. Tighten the fixing screws and nut securely.
• Lower the canopy to the motor housing.
Light L
Ground wire
Motor L
Neutral N
Light L
Fan L
Neutral N
Input L
Input N
Ground wire
L
N
Remote
control
receiver
AC
1. **Light
2. **Light intensity control
3. Fan intensity control
4. Timer
5. Batteries (2 x AAA)
6. **Colour temperature control
7. ON / OFF button
Remote control receiver placement:
Make the connection between the receiver cables and the fan motor cables following the
color indications. Make sure the connection is tight.
** Function only available when having
the LED plate installed.
2
3
4
5
1
6
7
REMOTE CONTROL CONNECTION
REMOTE CONTROL