U S ER MAN U AL
TB5F
Page 23
C O PYRIG H T ©2016 C reatC omm Technology
Frequency S can List: This only appears when the device is configured to S tation mode or
W DS S tation mode. If it’s not enabled, the station will scan all the channels which both the
device and the country code allowed and then choose the same channel as the
associated AP. If it’s enabled, click select, another window will pop up and let the user to
choose the working channels, and the channels should include the associated AP’s
channel, which can fasten the association process between the AP and the S tation
O utput Power: O utput power of the device.
C ountry C ode: Different countries allows different channels, use can choose the country
code to only allow the device works at the channels permitted in the particular country.
C hannel W idth: C hannel width selection, and TB5F device supports
5MH z/10MH z/20MH z/40MH z bandwidth.
Max TX Rate: Max transmission rate, and it can be used to limit the max transmission rate
of a device.
Lock AP MAC : In S tation, W DS S tation, and W DS Repeater modes, users can use this to
limit the APs associated to.
S ecurity: U ser can set the security based on needs to guarantee the wireless security.
W PA: Encryption method supported by 802.11 Protocols.
7
N etwork
7.1
R outer mode
TB5F acts as a router when configured to Router mode. In router mode, the connection is
shown in Figure 21. U ser needs to connect the PoE port of PoE adaptor to the PoE port of
the TB5F.
After the above connection, the TB5F can work as a router. The LAN port of PoE adaptor
acts as the W AN port of the router.