Page 5
Vortex8 User Manual
Version 1.0
1. About the Vortex8
IMPORTANT
- Power Vortex8 with the supplied PowerCon Cable only. (When using Vortex8 with water you must
only use the supplied cable as not all PowerCon cables are water resistant.
Use etherCON TOP connector only for preventing water from damaging ethernet ports
Vortex8 is rated IP65. Vortex8 must NOT be submerged in water.
Heavy -Vortex8 weighs 13.7kg/30lbs. Lift with care.
Do not stare directly at the light beam.
Ensure that the Vortex8 is clear of any obstructions in any direction with a minimum distance of 45cm/18”.
Not intended for permanent outdoor use. Temporary outdoor use only.
This product is intended for professional use and may only be operated by qualified persons.
Do not cover the ventilation slots on the side and rear of the Vortex8. Airflow is required for cooling and operation.
Inspect the power cable for damage prior to operation.
Always ensure that the fixture is earthed electrically.
The fixture may become hot during operation. Maximum Surface Temperature Tc = 70°C.
Check for visible damage to the fixture, cables or connectors and do not operate the device if damaged. Please contact
your a nearest authorised repair centre for the fixture to be repaired.
Do not open or disassemble the fixture under any circumstances, doing so voids warranty and may cause harm to you if powered.
1.3 Warnings
