Creality Sprite Extruder Pro Kit, Руководство пользователя

Страница: 7 / 10

5. Adjust the printer’s Esteps value to 424.9 (the value is for
reference only and can be fine-tuned according to the actual printing
situation), and then click "Store Settings".
将机器 Esteps 数值调节到 424.9（参考数值，可根据实际打印情况微调此
值），然后点击“存储设置”。
If the printer does not support adjusting the Esteps value to 424.9,
you can make it with the following 4 steps.
1.Create a new text file (txt) and type "M92 E424.9" in the text.
2.Press “Enter” to continue typing "M500".
3.Save the file as the gcode format, and copy it into TF card.
4.Insert the TF card into the printer and click to print this file. At
this time, the printer’s Esteps value has been adjusted to 424.9.
若机器不支持将 Esteps 数值调节到 424.9，可通过以下四步调节：
1. 新建一文本文档（txt），键入“M92 E424.9”；
2. 回车继续键入“M500”；
3. 将文件另存为 gcode 格式，拷入 TF 卡；
4. 插入机器点击打印此文件，此时机器 Esteps 数值已调节为 424.9。
1. After installation, you need to level printing platform again.
2. The side adjusting screw on the Sprite Extruder Pro can adjust the
clamping degree between extrusion gear and filament. Clockwise is for
tightening and anticlockwise is for loosening.
3. The withdrawal distance must be less than 3mm.
1. 安装完成后，需对打印平台重新进行调平。
2. 可通过调节 Sprite Extruder Pro 侧面调节螺丝，调节挤出齿轮与耗材夹紧程度，
顺时针调紧，反之调松。
3. 回抽距离需小于 3mm。
05