2.7.3 Write the firmware to the SD/TF card, then insert the SD/TF card into the
printer, click Next step.
2.7.4 After the printer is powered on, the Creality Sonic Pad will automatically
connect to the printer. (the firmware in SD/TF will be automatically flashed after
the printer is powered on)
2.7.5 After the printer firmware is flashed, click Restart.
3. Functional self-check
After the printer firmware is flashed, the Creality Sonic Pad will
automatically restart the printer. After restarting, it will enter the func-
tion self-test and follow the on-screen instructions. After the self-test is
completed, click Experience Now, the screen will save the relevant user
configuration, and the system will be reloaded. After entering the
Home page, you can start using this product.
06
