Creality LD-006, Руководство пользователя

Страница: 15 / 24

Release Film Instructions
离型膜安装说明
6
13
安装步骤
Installation steps
(Thickness)
厚度：0.15-0.2mm
透光率：95%
(Light Transmittance )
(Size)
尺寸：190mm*266mm
规格参数
Parameters
a.
b.
c. d.
a.
b.
c.
d.
Finally, place the film-ring assembly back into the vat frame
gently, then intall and tighten the fixing screws diagonally.
最后将套好离型膜的压圈放回料槽，安装14颗螺丝并采用对角方
式锁紧。
First, remove the 14 screws at the bottom of the vat and take
down the old release film.
首先拆卸料槽底部的14颗螺丝,取出坏的离型膜。
Prepare the new release film, peel off the the protective films
on both sides of the release film. Align the holes and fit the
release film on the clamping ring.
撕掉新的离型膜两个面上的保护膜，对好孔然后将离型膜套在压圈
上的柱子上。
The installed release film is as shown.
安装好的离型膜如下图。