1.Prepare→Auto home,and wait to stop.
3.Control→Motion→Z Offset→write down the value of B,then rotate the knob until it comes out as:
C=B+A
. Return Control and Select Store settings.
2. Prepare→Move axis→Move Z→Move 0.1mm→Rotate the knob until the distance between them is about 0.2mm(as a sheet of A4 paper),write
down the value of A.
0.2mm
( A4 paper)
A
B
C
07/
Bed Levelling
A<0
B<0
C<0