Creality CR-1000 Pro, Руководство пользователя

Страница: 13 / 26

Preheat Nozzle
①
First touch Automatic, heating nozzle.
PLA about 200
℃
， ABS about 240
℃
.
Feeding
②
Click to change the material, and manually
pass the material breaking test. After that,
feed the extrusion gear and click feed.
Cut the consumable port into an oblique angle with diagonal
pliers, and manually send the consumable through the small
pneumatic joint to the broken material detection switch. When
the consumable passes through the extrusion gear, you can
click feeding. When the consumables overflow from the
nozzle, it means that the consumables loading is completed. It
should be noted that because the machine has been tested
before leaving the factory, there will be residual consumables
in the nozzle, which may be inconsistent with the color of the
consumables you want to use. At this time, you only need to
extrude a small section of consumables to completely extrude
the residual consumables in the nozzle, and then you can
print the color you want.
Tips ： How to change filament?
When change the filament you need to heating
up the nozzle temperature to 200
℃
first. In
“ Refuel ” option, touch “ Retreat ” then the
filament will exit automatically, next you touch
“ Feed ” to change a new filament.
10.0
10.0
Material Cut-off
Detector Switch
Extrusion
9.Filling the Filament 填充耗材
09