5
Cable Connection
After the display is installed, please
connect the display cable.
Connect the Y-axis limit line.
14
A
Caution
Do not connect or disconnect the cables
when the machine is powered on.
Insert the Teflon tube into the
pneumatic connector (also insert
the blue wire clamp)
Connect the broken detection line
as shown in Figure A .
●
Select the correct input voltage match
your local power.
(115/230V)
●
Damage can occur if voltage is set
incorrectly.
●
Connect the power cord to turn the power
switch on.
Power cord x 1
14
30
