CRC SmartWasher SW-23-RGB, Руководство пользователя, Страница: 13 / 720

page 13 of 720
BIO
REMEDIATING parts washing system
SmartWasher
®
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
7.1.2. Model SW-25
1.
Remove the OzzyMat ® from its package, unfold it and
lay it on the mat support grid located in the lowest
level in the sink. Make sure to lay the OzzyMat
®
white side up.
2.
Place the false bottom in position in the sink.
3.
Form the flexible nozzle to its desired shape and be
sure that the parts brush is inside the sink
4. DO NOT PLUG UNIT IN BEFORE ADDING
OZZY JUICE
®
5.
At start up, carefully add ± 95 liter of OzzyJuice ® to
the SmartWasher ® by slowly pouring the solution
directly into the sink.
6.
Plug the unit into a 220 VAC GFCI electrical outlet
7.
The SmartWasher ® will take approximately four hours
to heat up to its selected optimal temperature of
40°C (± 1°) or 46°C (± 1°). This temperature will be
maintained as long as the SmartWasher
® is plugged
in and full of OzzyJuice ® . (If the Add Fluid Light is on,
the heater automatically shuts off)
33075
Drain Basket 3 1/2”
Stainless steel
32950
Multi-Layer OzzyMat
FL-4
33052
False Bottom With
Drain For Sink
33076
Mat Support Grid