CRC KM4201DQCI, Руководство пользователя, Страница: 51 / 215

51
NOTE
A, B and C Type does not have HD-SDI Input tap.
A, B and C Type
NTSC(PAL) 360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 960x480 (960x576)
4 Channel DVR 120 (100) 120 (100) 120 (100) 120 (100)
8 Channel DVR 240 (200) 240 (200) 240 (200) 240 (200)
16 Channel DVR 480 (400) 480 (400) 480 (400) 480 (400)
-HD-SDI Type-
D Type
360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 1280 x 720 1920 x 1080
4 Channel DVR
Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 15 fps per Channel Max. 7.5 fps per Channel
E Type
360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 1280 x 720 1920 x 1080
4 Channel DVR
Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 15 fps per Channel
F Type
360x240 (360x288) 720x240 (720x288) 720x480 (720x576) 1280 x 720 1920 x 1080
4 Channel DVR
Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel Max. 30 fps per Channel
 Click (  ) each frame on ‘Quality’ column to select recording quality of a corresponding camera. User may select its
recording quality from Super, High, Std and Low .
 Click (

) each frame on ‘Duration’ column to select recording duration (i.e., 10 second ~ 1 hour ) of a corresponding camera.
 User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
 Choose ‘OK’ to confirm the setting.
NOTE
D, E and F Type DVR can detect 1080i, 1080p or 720p HD-SDI signals. If user connected Camera before the booting, each
signal is automatically detected and recognized (Auto Detection).
CAUTION
IF USER CONNECTS DIFFERENT TYPES OF HD-SDI SIGNALS WHILE DVR IS OPERATING. IT MAY CAUSE MALFUNCTIONS OF DVR.
4.5.2 Schedule
 Please click (  ) RECORD>Schedule.
 Each weekday is composed of 24 ‘Time blocks’. Each block represent 1 hour.
 Click (

) Camera frame to select Camera No. 1.
 Please set the recording mode as follows:
① Mark a check box the desired recording mode in the schedule (i.e., Continuous, Alarm, Motion and Pre Alarm). If user
wants to stop recording, please clear all check boxes.
②
Click block, row, column or all (square box) to register desired recording mode.
-
Click (  ) a block and only the block will be registered.
-
Click (  ) a row (S~H) and the entire row will be registered.
- Click (

) a column (00~23) and the entire column will be registered.
- Click (

) a square box (top-left side between ‘S’ and ‘00’) and all the rows/columns will be registered.