10.
11.
12.
Step inside the Hexa II Binding.
13.
Adjust the Hexa II footstrap with the velcros for the best fit.
14.
If further adjustments for the angle of the binding is needed,
loosen the screws a little until the Hexa II Binding is able to spin.
Adjust the angle again to the desired position and fully tighten the
screws.
16.
Enjoy the ride!
15.
If further adjustments for the footstrap position and footpad
position are needed, undo the screws completely. Lift up the Hexa II
Binding, push the Quttro Stix down so they pop out of the Fusion
Frame. Adjust the Quattro Stix to the desired position and pop
them back in the Fusion Frame. Mount the Hexa II Binding back
on the board to the desired position and fully tighten your
screws.
Содержание HEXA 2
Страница 1: ...USER MANUAL...
