HCD139
（
B022
）
input mistakes. If the AUTO IP function is on, the stored IP data will be automatically added first
when you dial a number beginning with “0” at the on-hook pre-dialing mode, or re-dialing a
previously called number (either incoming or outgoing) beginning with “0”. When “0”Lock or
Full Lock is effective, Auto IP setting is not permitted.
LCD CONTRAST
When LCD displays SET 6 LCD , press
SET
and use
UP/DOWN
to select among the 5 degrees
which you prefer.
ANTI-STEAL
When LCD displays SET 7 ALAR , press
SET
, and you will see on LCD ALAR OFF . Use
UP/DOWN
to select ON or OFF and press
SET
to confirm.
DIALING MODE
When LCD displays SET 8 P-T , press
SET,
and you will see on LCD TONE or PULSE ,
indicating that TONE or PULSE is the present dialing mode. Use
UP/DOWN
to make the option,
and then press
SET
to confirm.
RECEIVING INCOMING CALLS
When receiving a phone call in line 1, LCD will display the phone number together with the
information of date, time, and a serial number. A new number will carry a “NEW” icon, and a
repeated number will carry a “REP” icon. A private call will display“------P------” . A call out of
service will display“------O------”An incorrect incoming signal will display . If it is a FSK“------
E-------”format Caller ID signal, the current month, date and time display will be updated (while
the year remains unchanged). For line 2, LCD will only display the phone number and “2L”.
CHECKING INCOMING AND OUTGOING CALLS
The incoming and outgoing calls of line 1 & line 2 are stored separately. The numbers of incoming
calls for line 1 are shown on LCD as default setting. Use
UP/DOWN
to review the incoming calls
of line 1 including phone number, date, and time. To scroll rapidly, press and hold
UP/DOWN
.
You can also use SCAN MODE
to make the option shown on LCD: LINE 1 IN SCAN , LINE 1
OUT SCAN , LINE 2 IN SCAN , LINE 2 OUT SCAN , and use
UP/DOWN
to review the
information of the incoming and outgoing calls including phone number, date, and time. To scroll
rapidly, press and hold
UP/DOWN
for 3 second.
RE-DIALING AN INCOMING OR OUTGOING NUMBER
When both lines are at the on-hook state, press the
RD
key to re-dial from line 1 when the number
is on display. Press twice to add “0” at beginning of the area code if it has not been set (the
3
