800.967.6696 | crateandbarrel.com
1
2
Insert 2
wood dowels
into
left end panel
as shown. Attach 2
brackets
to
left end panel
with 1
end panel bolt
per bracket.
Secure bolts, but do not over tighten, with a
small Allen wrench
. At this point, insert 1
end panel bolt
into the
exposed
hole
in
left end panel
as shown. Repeat steps for remaining
right end panel
.
Fit brackets and dowels of
left end panel
into corresponding holes of 2
side panels
. Using a
small Allen wrench
, secure
top of each side panel with 1
end panel bolt
as shown. Using a
small Allen wrench
, secure bottom of each side panel
with 2
large bolts
, 2
spring washers
and 2
half-moon brackets
.
Made in Vietnam - r05
Andersen Crib
Assembly Instructions
Page 3 of 6
exposed hole
for toddler rail
assembly
Left end
panel
