background image

• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib.  Keep instructions for future use.

•  For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be 
greater than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding.  Never add a pillow or comforter.  Never place additional padding under an 
infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless 
otherwise advised by your physician.

Strangulation Hazard:

• Strings can cause strangulation!  DO NOT place items with a string, cord or ribbon around a child’s neck, such as 
hood strings or pacifier cords.  DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any 
reason.
• To help prevent strangulation, tighten all fasteners.  A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.

Fall Hazard:

• When child is able to pull to standing position, set mattress to lowest  position and remove bumper pads, large toys 
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used and the 
child should be placed in a youth or regular bed.       

      

CAUTION:

  ANY MATTRESS USED IN THIS CRIB 

MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8 

INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING 

6 INCHES (15 cm).

• Check this product for damaged hardware, loose joints, missing parts or sharp edges before and after assembly and 
frequently during use.  Securely tighten loose bolts and other fasteners.  DO NOT use crib if any parts are missing, 
damaged, or broken.  Contact Crate and Barrel® for replacement parts and instructional literature if needed.  DO NOT 
substitute parts.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Periodically check to see that all bolts are securely tightened.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water.  Rinse with clean water using a 
soft cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.   

WARNING:

!

!

WARNING:

!

800.967.6696 | crateandbarrel.com

Made in Vietnam - r05

Andersen Crib 

Assembly Instructions

 

Содержание Andersen Crib








Отзывы: