6
The DSP Section:
Use the DSP control to select one of the 16 built-in
digital effects. Use the DSP Level control to adjust
the amount of selected effect. In the fully counter
clockwise position there will be no effect applied. As
you rotate the control closckwise the amount of
effect increases.
The chart below describes each of the 16 positions
of the selector, starting at the 12:00 position and
working clockwise.
FLANGER 1:
slow deep flange w/reverb
FLANGER 2:
flange w/reverb & delay
CHORUS 1:
slow tremolo chorus w/reverb
CHORUS 2:
chorus w/reverb & delay
ROTARY:
rotating speaker effect
OCTAVE:
adds signal one octave below
T-WAH:
touch wah effect
I-WAH:
inverse wah effect
DOUBLER:
adds second signal slightly out of sync
REVERB:
small room reverb
medium room reverb
large room reverb
concert hall reverb
DELAY:
short slapback w/small room reverb
medium delay w/large room reverb
slow deep flange w/reverb
Guitar Amplifier
