FlexWave120H Guitar Amplifier w/DSP and Channel Tracking
FlexWave120H TECHNICAL SPECIFICATIONS:
Output Power Rating
120W rms @ 5% THD into 4 ohm load, 120 VAC
Gain
High Gain Channel
110 dB, all controls @ 10
Overdrive Ch
88 dB, all controls @ 10
Clean Ch
58 dB, all controls @ 10
CD Input
29 dB
Maximum Input Signal Accepted
2.5 volts rms @ 400 Hz
Input Impedance
470k ohm
High Gain Channel
Shape Control
Proprietary Circuit
Overdrive Channel
Low
20 dB range @ 80 Hz
Mid
15 dB range @ 1 kHz
High
20 dB range @ 10 kHz
Clean Channel
Low
36 dB range @ 80 Hz
Mid
15 dB range @ 800 Hz
High
40 dB range @ 10 kHz
External Speaker:
4 ohm minimum nominal impedance
Power Requirements
120 VAC, 60 Hz, 95 VA
100/115 VAC, 50/60 Hz, 95 VA
230/240 VAC, 50/60 Hz, 95 VA
Size (H x W x D)
10.2 in/25.9 cm x 29.8 in/75.7 cm x
10.5 in/26.7 cm
Weight
27.8 lb/12.6 kg
The FlexWave120H is covered with a durable Tolex material. Wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders and are hereby acknowledged.
Service Information:
If you are having a problem with your FlexWave120H, you can go to our website
(www.crateamps.com) and click on Support for service information, or call 1-800-898-3211
during business hours (7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S.,
contact your local distributor for technical support and service.
www.crateamps.com
@2007 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. 0022726 Rev. A 02/07
12
