Make a hole at the exit point for the servo wires to exit the wing. Glue the nylon protectors on the front and back of
the wing with a low temperature glue gun to prevent the rubber bands from tearing the wing.
Bind your radio and center your servos. Tighten the EZ connectors so the ailerons are in line with the wing. Make
sure the ailerons are moving the right direction. When you stand behind the plane and push the right transmitter
stick to the right the right aileron should go up and the left aileron down.
Содержание Pelican Aileron Wing
Страница 7: ......
