Crary Tile Pro, Руководство владельца и каталог запасных частей

Страница: 26 / 64

Tile Plow Owner’s/Parts Manual
20 PN:90807-00 R090114
OPERATION
5.10 TRANSPORTING
The Tile Plow is designed to be easily and conveniently
moved from location to location. When transporting the
equipment, review and follow these safety instructions:
1. Make sure you are in compliance with all local regula-
tions regarding transporting equipment on public roads
and highways.
2. It is the responsibility of the owner to know the lighting
and marking requirements of the local highway authori-
ties and to install and maintain the equipment to provide
compliance with the regulations. Add extra lights when
transporting at night or during periods of limited visibility.
3. See the owner’s manual that came with your tractor for
proper transportation guidelines.
After the season’s use, the equipment should be thoroughly
inspected and prepared for storage. Repair or replace any
worn or damaged components to prevent any unnecessary
down time at the start of the next season. To ensure a long,
trouble free life, this procedure should be followed when
preparing the unit for storage:
1. Clear the area of bystanders, especially small children.
2. Thoroughly wash the entire machine using a pressure
washer to remove all dirt, mud, debris or residue.
3. Inspect the following components:
A. Hydraulic Components:
• Check all hydraulic lines for damage; replace
as required.
B. Tile Plow Components
• ???
4. Make a list of all parts needed for repairs and order
them immediately. Repairs can then be done when
time permits and prevent unnecessary down time at
the start of next season.
5. Lubricate all grease points to remove any water residue
from the washing and prevent rusting during the storage
period. Rotate all moving parts to distribute lubricant
to all surfaces.
6. Apply a light coat of grease on the shafts.
7. Touch up all paint nicks and scratches to prevent rust-
ing.
Removing from storage/pre-season maintenance:
When removing from storage and preparing to use, follow
this procedure:
1. Clear the area of bystanders, especially small children.
2. Remove the tarpaulin from the machine if it was cov-
ered.
3. Clean off accumulated trash and dirt.
4. Check routing and securing of all hydraulic lines and
adjust as required.
5. Rotate all components and systems by hand to see that
none are seized. Loosen any seized components with
penetrating oil before starting.
6. Retighten any loose bolts to their specified torque.
7. Lubricate all grease points and shaft surfaces.
8. Check for excessive wear on all moving parts.
9. Tighten all hydraulic connections and mounts. Replace
o-rings, fittings, or connectors subject to leaking.
10. Review and follow all items in the Pre-Operaton and
Machine Break-In sections before starting (Sections
5.3 & 5.4).
11. Install all safety shields and review precautions with
operators and other personnel involved in the operation.
5.11 STORAGE
5.11 STORAGE
8. Move the equipment to its storage area.
9. Select an area that is dry, level, and free of debris.
10. If the equipment cannot be stored inside, cover with a
waterproof tarpaulin and tie securely in place.
11. Store out of the way of human activity.
12.
Do not allow children to play on or around stored unit.