M1
66
.0
Page
2
of
2
January 3, 2019
SERVICE INFORMATION
11. Enter the desired new name. Several buttons are used, as needed, to accomplish the changing of
the current name to the desired new name;
A.
Buttons on each the side of the screen
– Used to select a desired character.
Each button may have to be pressed multiple times as more than one character is listed
under each button.
B.
Button on the bottom left of the screen
– Used to scroll thru character sets that can be
displayed and chosen using the side buttons.
These include small cap letters, large cap letters, numbers, special characters, and an empty
space used between words.
C.
Button on the bottom right of the screen
– Used to delete the last character currently
displayed on the screen.
D.
Button on the bottom center of the screen
– Used to save the changes that have been
made in the process of entering a new name.
12. With the new name entered as desired, press the button labeled
SAVE
, to save the new name
and return to the previous screen titled for that drink.
13. Press the button labeled
UP ONE LEVEL
, to return to the screen titled Customize Drink Names.
14. Press the button labeled
UP ONE LEVEL
again, to return to the screen titled Customize
Messages.
15. Press the button labeled
REFRESH TRANSLATIONS
, to update the data and activate the new
name in the customer drink menu.
A screen will be displayed momentarily showing that this is happening, wait for it to finish.
16. Press the button labeled
UP ONE LEVEL
again to return to the screen titled Language.
17. Press the button labeled
UP ONE LEVEL
again to return to the screen titled System Settings.
18. Press the button labeled
UP ONE LEVEL
again to return to the screen titled Main Menu.
19. Close the door on the machine and allow it to return to Stand-By mode.
20. When prompted, press any button to display the customer drink menu.
21. Verify that the new name for the drink is now in use and functions.
NOTE
– The empty space character used between words is located in the small caps character set,
under the top left, or #1,
button. It is titled “SPC”.
