Crane Linea, Руководство пользователя

Страница: 13 / 50

USER MANUAL
Se
ctio
n
2
- I
n
sta
lla
tio
n
the heater tank will start to fill. Ensure that no
water overflows from the heater tank overflow
pipe into the drip tray. Check the system for
leaks.
Note: Water will flow through the espresso system
and be dispensed from the dispense nozzles (Espresso
model only). Place a container of at least 950ml under
the dispense head.
Note: The machine has a safety feature which will allow
the heater tank to fill for a maximum of two minutes. If
after power-up the heater tank has not filled within this
time, the mains power supply should be switched off and
then on again to reset the heater tank time-out.
Important! Should the machine fail to fill correctly
or leak, turn off the water and power to the machine
before investigating the fault.
6. All Models: Rotate soluble / freshbrew ingredient
canister outlets to upright position. Place
canisters on a clean flat surface to fill.
DO NOT place the canister on the floor
or overfill with ingredient.
Refit canister into machine ensuring that it is
returned to the correct position.
7. Espresso Models: To replenish coffee beans
remove the bean hopper lid and fill with fresh
coffee beans. Refit the lid and lock in place.