6
MODEL: 91779 12/2014
USA
1855 754 8297
AFTER SALES SUPPORT
USA
Exercise Ball
To Inflate Ball (Warning: Do not over inflate)
USA
Exercise Ball
To Inflate Ball (Warning: Do not over inflate)
5
MODEL: 91779 12/2014
USA
1855 754 8297
AFTER SALES SUPPORT
•
DO NOT
use an air compressor to inflate the ball. Air
compressors blow cold air that could expand after returning to
room temperature. Only inflate the ball with the pump that is
included with this product.
Pump the exercise ball until it is approx. 3-5 cm smaller than the
maximum diameter indicated (approx. 10-15 cm smaller in
circumference).
After the desired diameter size is reached, remove the hose
nozzle and seal the ball with the plug.
As the exercise ball automatically stretches, leave it now for a
further 2 hours to allow the air to disperse perfectly, depending
on the ball size and temperature.
After 2 hours, measure the ball again with the tape measure that
is included with this product and pump more air or release air
until the desired circumference is reached. Measure around the
center of the ball. Check that the enclosed measuring tape has
the correct color. The circumference should be as follows:
Diameter:
55 cm ball (22 inches)
65 cm ball (26 inches)
75 cm ball (30 inches)
Circumference
(around center of ball):
172 cm (68 inches)
204 cm (80 inches)
235 cm (92 inches)
Tape measure color:
Red
Green
Anthracite / Turquoise
3. Insert nozzle in to inflation hole of exercise
ball.
2. Place white nozzle tip on the opposite end
of the hose.
5. Once ball is completely inflated remove the
hose nozzle.
6. A spare plug is also included in the box.
1. Remove ball and foot pump from box.
Remove the ball from the polybag.
DO
NOT
use a sharp instrument to open the
bag. To inflate attach hose on white pump
valve. Make sure hose is secure.
4. Place ball on flat surface and begin
pumping air into ball. Press pump
repeatedly.
•
DO NOT
use the ball if it is over inflated or expanded to a size
greater than the correct size.
• After the ball is inflated, measure the ball periodically to verify it
has remained at the correct dimension.
148 mm
148 mm
210 mm
